Parts from
Chalmers 800 Series Truck Suspension |
Login: Visitor@nsihd.com #1: Cash/Counter Customer
|
Pic | Description | Wt | ||
---|---|---|---|---|
Chalmers Walking Beam, 54" Axle | 102.55 | |||
![]() | Restrictor Can 20K Load | 10.77 | ||
![]() | Restrictor Can High Center of Gravity 20K Load | 11.15 | ||
![]() | Rubber Spring | 20.30 | ||
![]() | Spring Plate 13°, Low Mount | 14.89 | ||
![]() | Spring Plate 10°, High Mount | 14.78 | ||
![]() | 40K Torque Arm Bushing 40K | 0.66 | ||
![]() | Polyurethane 40K Torque Arm Bushing(2 Per End) ![]() |
0.39 | ||
![]() | 40K Oversize Torque Arm Bshing 40K | 0.75 | ||
![]() | 46K Torque Arm Bushing 46K | 1.09 | ||
![]() | Polyurethane 46K Torque Arm Bushing(2 Per End) ![]() |
0.59 | ||
46K Standard Torque Arm Bushing Kit w/ Hardware ![]()
|
30.00 | |||
Chalmers 46K Bushing Standard USA ![]() |
0.98 | |||
![]() | 46K Oversize Torque Arm Bshing 46K | 1.10 | ||
Polyurethane 46K Oversized Torque Arm Bushing (2 Per End) ![]() |
0.60 | |||
![]() | 46K Oversize Torque Arm Bushing Kit w/ Hardware ![]()
|
32.50 | ||
![]() | Spigot Cap 40K | 0.96 | ||
![]() | Spigot Cap 46K | 1.38 | ||
![]() | Torque Arm Bolt Kit 4 Flange Bolts & 4 Flange Nuts ![]()
|
2.90 | ||
![]() | Bolt Flanged 5/8"-11x5 1/2" G8 Yellow Zinc | 0.58 | ||
![]() | Nut Flanged Lock 5/8-11x5/8Ht w/ 11/16Hex GrC Yellow Zinc ![]() |
0.10 | ||
Cap ![]() |
1.60 | |||
Plate ![]() |
2.10 | |||
Saddle ![]() |
5.00 | |||
![]() | Bolt 5/8"-18x5" G8 | 0.49 | ||
![]() | Monroe Shock Absorber Gas-Magnum 60 Series ![]() |
5.66 |
Products listed are suggested parts and may not fit every applications. Please verify parts prior to ordering.
Please use this Feedback Form if you have any comments or suggestions, or suspect any inaccuracies in our data.